POWER SEAT SWITCH(for Power Captain Seat with Memory) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 SEAT LEG COVER LH


    1. A01UF7IC01
      B006Q1Z Place Hands Here
      B006N8A Remove in this Direction

      Pull as shown in the illustration to detach the claw and guide and remove the No. 2 seat leg cover LH.

    2. A01IEOI

      Disconnect the connector.

  2. REMOVE REAR POWER SEAT SWITCH LH


    1. A01UEN8C01
      *1 Protective Tape

      Apply protective tape as shown in the illustration.

    2. A01UDETC01
      *1 Protective Tape
      B006N8A Remove in this Direction

      Using a screwdriver, detach the claw.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disconnect the connector and remove the rear power seat switch LH.

  3. REMOVE REAR NO. 3 POWER SEAT SWITCH


    1. A01UEECC01
      *1 Protective Tape

      Apply protective tape as shown in the illustration.

    2. A01UE3ZC01
      *1 Protective Tape
      B006N8A Remove in this Direction

      Using a screwdriver, detach the claw.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01IFZF

      Disconnect the connector and remove the rear No. 3 power seat switch.