POWER SEAT SWITCH(w/ Shoulder Switch) INSPECTION

PROCEDURE

1. INSPECT FRONT POWER SEAT SWITCH (w/ Shoulder Switch)

   
   
   1. 

      *1	Reclining Switch
      *2	Slide Switch
      *a	Component without harness connected (Front Power Seat Switch (w/ Shoulder Switch))

      Measure the resistance according to the value (s) in the tables below.

      Standard Resistance (Reclining Switch):

      Tester Connection	Switch Condition	Specified Condition
      10 (B) - 4 (MRF) 9 (MRR) - 3 (RCLR)	Front	Below 1 Ω
      4 (MRF) - 8 (RCLF) 9 (MRR) - 3 (RCLR)	Off
      10 (B) - 9 (MRR) 4 (MRF) - 8 (RCLF)	Rear

      Standard Resistance (Slide Switch):

      Tester Connection	Switch Condition	Specified Condition
      10 (B) - 5 (MSF) 6 (MSR) - 2 (SLDR)	Front	Below 1 Ω
      5 (MSF) - 7 (SLDF) 6 (MSR) - 2 (SLDR)	Off
      10 (B) - 6 (MSR) 5 (MSF) - 7 (SLDF)	Rear

      Tech Tips

      If the result is not as specified, replace the power seat switch (w/ shoulder switch).