POWER SEAT SWITCH(for Front Passenger Seat) INSPECTION

PROCEDURE

1. INSPECT FRONT POWER SEAT SWITCH RH (for LHD)

   
   
   1. 

      *1	Slide Switch
      *2	Reclining Switch
      *a	Component without harness connected (Front Power Seat Switch RH)

      Measure the resistance according to the value (s) in the tables below.

      Standard Resistance (Slide Switch):

      Tester Connection	Switch Condition	Specified Condition
      5 (SLDF) - 8 (B)	Front position	Below 1 Ω
      2 (SLDR) - 11 (E)
      5 (SLDF) - 11 (E)	Neutral	Below 1 Ω
      2 (SLDR) - 11 (E)
      5 (SLDF) - 11 (E)	Rear position	Below 1 Ω
      2 (SLDR) - 8 (B)

      Standard Resistance (Reclining Switch):

      Tester Connection	Switch Condition	Specified Condition
      10 (RCLF) - 8 (B)	Front position	Below 1 Ω
      9 (RCLR) - 11 (E)
      10 (RCLF) - 11 (E)	Neutral	Below 1 Ω
      9 (RCLR) - 11 (E)
      10 (RCLF) - 11 (E)	Rear position	Below 1 Ω
      9 (RCLR) - 8 (B)

      If the result is not as specified, replace the front power seat switch RH.

2. INSPECT FRONT POWER SEAT SWITCH LH (for RHD)

   
   
   1. 

      *1	Slide Switch
      *2	Reclining Switch
      *a	Component without harness connected (Front Power Seat Switch LH)

      Measure the resistance according to the value (s) in the tables below.

      Standard Resistance (Slide Switch):

      Tester Connection	Switch Condition	Specified Condition
      5 (SLDF) - 8 (B)	Front position	Below 1 Ω
      2 (SLDR) - 11 (E)
      5 (SLDF) - 11 (E)	Neutral	Below 1 Ω
      2 (SLDR) - 11 (E)
      5 (SLDF) - 11 (E)	Rear position	Below 1 Ω
      2 (SLDR) - 8 (B)

      Standard Resistance (Reclining Switch):

      Tester Connection	Switch Condition	Specified Condition
      10 (RCLF) - 8 (B)	Front position	Below 1 Ω
      9 (RCLR) - 11 (E)
      10 (RCLF) - 11 (E)	Neutral	Below 1 Ω
      9 (RCLR) - 11 (E)
      10 (RCLF) - 11 (E)	Rear position	Below 1 Ω
      9 (RCLR) - 8 (B)

      If the result is not as specified, replace the front power seat switch.