SEAT HEATER SWITCH INSPECTION

PROCEDURE


  1. INSPECT FRONT NO. 2 CONSOLE BOX INSERT


    1. A01II5OC01
      *a

      Component without harness connected

      (Front No. 2 Console Box Insert (Seat Heater Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Seat Heater Switch (for LH side)
      Tester Connection Condition Specified Condition
      2(IG) - 6(SW) OFF 10 kΩ or higher
      2(IG) - 1(RV) Volume Low 2.72 to 4.08 kΩ
      Volume Max 0.28 to 0.42 kΩ
      Seat Heater Switch (for LH side)
      Tester Connection Condition Specified Condition
      2(IG) - 4(SW) OFF 10 kΩ or higher
      2(IG) - 3(RV) Volume Low 2.72 to 4.08 kΩ
      Volume Max 0.28 to 0.42 kΩ

      Tech Tips

      If the result is not as specified, replace front No. 2 console box insert (seat heater switch).