SEAT MEMORY SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH (for LHD)


    1. A01IKDUC01
      *a

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection Switch Condition Specified Condition
      5 (MRY) - 7 (E) SET switch pressed Below 1 Ω
      4 (M1) - 7 (E) 1 switch pressed
      3 (M2) - 7 (E) 2 switch pressed
      1 (M3) - 7 (E) 3 switch pressed

      If the result is not as specified, replace the seat memory switch.

  2. INSPECT SEAT MEMORY SWITCH (for RHD)


    1. A01IIOAC01
      *a

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection Switch Condition Specified Condition
      5 (MRY) - 7 (E) SET switch pressed Below 1 Ω
      4 (M1) - 7 (E) 1 switch pressed
      3 (M2) - 7 (E) 2 switch pressed
      1 (M3) - 7 (E) 3 switch pressed

      If the result is not as specified, replace the seat memory switch.