CHARGING SYSTEM PRECAUTION


  1. INITIALIZATION

    Note


    • When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

    System Name See Procedure
    Stop and Start System

    Click here

    Power Door Lock Control System
    Air Conditioning System
    Power Slide Door System
    Power Back Door System

  2. CHARGING SYSTEM PRECAUTION

    Note


    • Check that the battery cables are connected to the correct terminals.

    • Disconnect the battery cables when the battery is given a quick charge.

    • Do not perform tests with a high voltage insulation resistance tester.

    • Never disconnect the battery cables while the engine is running.

    • Check that the charging cable nuts are tightened on terminal B of the generator assembly and on the engine room relay block and junction block assembly.