TELEVISION CAMERA(for Rear) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the rear television camera installation/removal are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative Functions when not Performed Link

  • Removal/installation of the rear television camera assembly

  • Replacement of the rear television camera assembly

 Television camera view adjustment Panoramic view monitor system

Click here

PROCEDURE


  1. PRECAUTION

    Click here

  2. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  3. REMOVE REAR TELEVISION CAMERA ASSEMBLY


    1. B006LC1

      Remove the 2 screws.

    2. B006MYA

      Disconnect the connector.

    3. B006OGYC01
      B006N8A Remove in this Direction

      Using the pliers, disengage the grommets as shown in the illustration to remove the rear television camera assembly.