TELEVISION CAMERA(for Side) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be per formed after parts are removed, installed or replaced during the side television camera removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative Functions when not Performed Link

  • Work that changes the angle of side television camera assembly RH/LH such as removal/installation of the side television camera assembly RH/LH

  • Replacement of the side television camera assembly RH/LH

 Side television camera view adjustment Panoramic view monitor system

Click here

Tech Tips


  • Use the same procedure for the RH and LH sides.


  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Click here

  2. REMOVE OUTER MIRROR LH

    Tech Tips

    Use the same procedure for the RH and LH sides.

    Click here

  3. REMOVE OUTER MIRROR COVER LH

    Tech Tips

    Use the same procedure for the RH and LH sides.

    Click here

  4. REMOVE SIDE TELEVISION CAMERA ASSEMBLY LH


    1. B006OT1

      Disengage the clamps.

    2. Remove the 2 screws.

    3. B006OYHC01
      *a Protective tape
      B006QOD Disengage
      B006N8A Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws as shown in the illustration to remove the under cover.

    4. B006M8I

      Disconnect the 2 connectors.

    5. B006R15

      Remove the 2 screws and side television camera assembly LH from the under cover.