NAVIGATION RECEIVER INSTALLATION

PROCEDURE

1. INSTALL NAVIGATION RECEIVER ASSEMBLY

2. INSTALL NO. 1 RADIO BRACKET

   
   

   1. Install the No. 1 radio bracket with the 4 screws.

3. INSTALL NO. 2 RADIO BRACKET

   
   

   1. 

      Engage the clamp to temporarily install the No. 2 radio bracket.

   2. Install the No. 2 radio bracket with the 4 screws.

4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET

   
   

   1. Connect the connectors.

   2. 

      Install in this Direction

      Engage the claws to temporarily install the navigation receiver assembly with bracket as shown in the illustration.

   3. Install the navigation receiver assembly with bracket with the 4 bolts.

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

7. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL

   Click here

8. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for Separate Console Box Type)

   Click here

9. INSTALL CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL (for Separate Console Box Type)

   Tech Tips

   Use the same procedure as for the center No. 1 instrument cluster finish panel. (for Separate Console Box Type)

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (for Integrated Console Box Type)

    Click here

11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for Integrated Console Box Type)

    Tech Tips

    Use the same procedure as for the instrument panel finish panel end LH. (for Integrated Console Box Type)

12. INSTALL NO. 2 BOX BOTTOM MAT

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

    Torque:

    5.4 N*m  { 55 kgf*cm, 4 ft.*lbf }