NAVIGATION SYSTEM(for Navigation Receiver Type) Cursor or Map Rotates when Vehicle Stopped

PROCEDURE


  1. CHECK CONDITION


    1. B006PTM

      Check with the customer if the vehicle has been turned by a turntable.

      OK
      Vehicle has not been turned by a turntable.

      Tech Tips

      If the vehicle is turned on a turntable with the engine switch turned on (ACC or IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the engine switch off and back on (ACC or IG) again with the vehicle completely stopped.

      Result
      Proceed to
      OK
      NG

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    NG

    TURN ENGINE SWITCH ON (ACC OR IG) WHEN VEHICLE IS COMPLETELY STOPPED