BACK DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 3 SPEAKER ASSEMBLY


    1. Visually check the rear No. 3 speaker assembly.

      OK
      The cone paper of the rear speaker assembly is not torn.

    2. Check the resistance.


      1. A01IL28C01
        *a

        Component without harness connected

        (Rear No. 3 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4.8 to 6.8 Ω
        3 - 4 Always 4.8 to 6.8 Ω

        If the result is not as specified, replace the rear No. 3 speaker assembly.