ROOF SPEAKER INSPECTION

PROCEDURE


  1. INSPECT ROOF SPEAKER ASSEMBLY


    1. Visually check the roof speaker assembly.

      OK
      The cone paper of the roof speaker assembly is not torn.

    2. Check the resistance.


      1. A01II17C01
        *a

        Component without harness connected

        (Roof Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 6.8 to 10.2 Ω

        If the result is not as specified, replace the roof speaker assembly.