REAR SEAT ENTERTAINMENT SYSTEM(for 9 Inch) OPERATION CHECK


  1. START DIAGNOSTIC MODE


    1. Enter diagnostic mode (for Navigation Receiver Type).


      1. Turn the engine switch on (IG).

      2. While pressing and holding the "SETTING" switch on the rear switch and volume assembly, operate the light control switch: Off → Tail → Off → Tail → Off → Tail → Off.

      3. Diagnostic mode starts and the "REAR Check" screen will be displayed.

    2. Enter diagnostic mode (for Radio and Display Type).


      1. Turn the engine switch on (IG).

      2. Turn the navigation receiver assembly screen display off.

      3. Turn the navigation receiver assembly power supply off.

      4. Press the ">" switch 5 times, and then press the "<" switch 5 times within 15 seconds.

      5. Diagnostic mode starts and the "REAR Check" screen will be displayed.

  2. COLOR BAR CHECK

    Tech Tips


    • Use the rear switch and volume assembly for each inspection.

    • This mode checks the color display on the television display assembly.

    • The television display assembly is not a touch panel type display. Do not touch the screen.

    • Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.


    1. A01IEZF

      Select "Color Bar Check".

    2. A01IIAH

      Color Bar Check


      1. Check the display color.

        Tech Tips


        • The entire screen turns to the color or stripe selected.

        • The screen returns to the "Color Bar Check" screen if the rear switch and volume assembly is operated again.

  3. REMOTE COMMANDER CHECK

    Tech Tips


    • Use the rear switch and volume assembly for each inspection.

    • The rear switch and volume assembly switches are checked in the following procedure.

    • The television display assembly is not a touch panel type display. Do not touch the screen.

    • Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.


    1. A01II55

      Select "Remote Commander Check".

    2. A01IJX4E01

      Remote Commander Check


      1. Operate each switch and check that the switch name is correctly displayed.

        Screen Description
        Display Content
        *a: Name of switch being pushed Name of the pushed switch is displayed

  4. START SCREEN LANGUAGE

    Tech Tips


    • Use the rear switch and volume assembly for each inspection.

    • The language for the start screen is selected in this procedure.

    • The television display assembly is not a touch panel type display. Do not touch the screen.

    • Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.


    1. A01IGVG

      Select "Start Screen Language".

    2. A01IEL1

      Select the language for the start screen.

  5. FINISH DIAGNOSTIC MODE


    1. Turn the engine switch off.