PROCEDURE
INSTALL NO. 2 STEERING RACK BOOT
|
Lithium Soap Base Glycol Grease |
Apply lithium soap base glycol grease to the inside of the small opening of a new No. 2 steering rack boot.
Install the No. 2 steering rack boot to the groove on the rack housing.
Note
Be careful not to damage or twist the No. 2 steering rack boot.
Make sure that the No. 2 steering rack boot is free of rust and foreign matter.
INSTALL NO. 1 STEERING RACK BOOT
Tech Tips
Perform the same procedure as for the No. 2 steering rack boot.
INSTALL NO. 2 STEERING RACK BOOT CLAMP
Temporarily install a new No. 2 steering rack boot clamp to the No. 2 steering rack boot.
Note
Do not damage the No. 2 steering rack boot.
Tech Tips
Make sure that the protrusion of the No. 2 steering rack boot clamp is positioned within the area shown in the illustration.
|
Up |
|
Front of Vehicle |
Using SST, install the No. 2 steering rack boot clamp as shown in the illustration.
| Clearance |
|---|
| 3.0 mm (0.118 in.) or less |
Note
Be careful not to damage the No. 2 steering rack boot.
INSTALL NO. 1 STEERING RACK BOOT CLAMP
Tech Tips
Perform the same procedure as for the No. 2 steering rack boot clamp.
INSTALL STEERING RACK BOOT CLIP (for LH Side)
|
Up |
|
Front of Vehicle |
Using pliers, install the steering rack boot clip.
Tech Tips
Make sure that the tabs of the steering rack boot clip are positioned within the area shown in the illustration.
INSTALL STEERING RACK BOOT CLIP (for RH Side)
Tech Tips
Perform the same procedure as for the LH side.
INSPECT STEERING GEAR ASSEMBLY
Using SST, rotate the pinion shaft to see if both the left and right steering rack boots expand and contract smoothly.
If both the left and right steering rack boots do not expand and contract smoothly, use new steering rack boot clamps and reinstall the steering rack boots.