POWER STEERING SYSTEM, Diagnostic DTC:C1582

DTC Code DTC Name
C1582 Assist Map Number Mismatch

DESCRIPTION

When an incorrect ECM, main body ECU (multiplex network body ECU) or skid control ECU (brake actuator assembly) is installed after the assist map has been written to the power steering ECU assembly, DTC C1582 is stored because the information stored in the power steering ECU assembly does not match the vehicle specifications.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note
C1582 Assist Map Number Mismatch Assist map number mismatch

  • CAN communication system

  • Incorrect ECM

  • Incorrect main body ECU (multiplex network body ECU)

  • Incorrect skid control ECU (brake actuator assembly)

  • Power steering ECU assembly

 EPS warning light: Does not come on Assist Map Writing is performed or the power switch is turned on (IG) again -

CAUTION / NOTICE / HINT

Note

If the power steering ECU assembly has been replaced, perform assist map writing and torque sensor zero point calibration.

Click here

Tech Tips

Related parts store information necessary for assist map writing.

Related Part:


  • ECM

  • Main body ECU (Multiplex network body ECU)

  • Skid control ECU (Brake actuator assembly)

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Check for DTCs.

      for LHD: Click here

      for RHD: Click here

      Result
      Result Proceed to
      CAN communication system DTCs are not output. A
      CAN communication system DTCs are output. B

    B

    GO TO CAN COMMUNICATION SYSTEM for LHD: Click here
    GO TO CAN COMMUNICATION SYSTEM for RHD: Click here

    A

  2. CHECK RELATED PART


    1. Check if the part below has been replaced with an incorrect part in the past.

      Related Part ECM
      Main body ECU (Multiplex network body ECU)
      Skid control ECU (Brake actuator assembly)

      Note

      When removing the related part to check it, be sure to follow the appropriate procedures and precautions.


    2. When DTC C1582 is output and parts have not been exchanged, replace the power steering ECU assembly as it may have an internal malfunction.

      Note

      If the power steering ECU assembly has been replaced, perform assist map writing.

      Click here

      Result
      Result Proceed to
      The related part has an incorrect part number. A
      The related part has the correct part number, or a related part and power steering ECU assembly have not been replaced. B

    B

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    A

  3. REPLACE RELATED PART WITH PART THAT HAS CORRECT PART NUMBER


    1. Replace the related part with one that has the correct part number.


      Result
      Proceed to
      NEXT

    NEXT

  4. CHECK FOR DTC


    1. Check for DTCs.

      Click here


      Chassis > EMPS > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

    A

    END

    B

    REPLACE POWER STEERING ECU ASSEMBLY Click here