ELECTRIC PARKING BRAKE SWITCH INSPECTION

PROCEDURE


  1. INSPECT COMBINATION SWITCH ASSEMBLY (ELECTRIC PARKING BRAKE SWITCH)


    1. A01IJOWC02
      *a

      Component without harness connected

      (Combination Switch Assembly (Electric Parking Brake Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      6 (LOK1) - 2 (GND1) OFF(Release) 102.2 to 109.354 kΩ
      ON(Lock) 2.09 to 2.42 kΩ
      Switch not operated 102.2 to 109.354 kΩ
      13 (LOK2) - 2 (GND1) OFF(Release) 5.394 to 6.206 kΩ
      ON(Lock) 0.968 to 1.232 kΩ
      Switch not operated 5.394 to 6.206 kΩ
      5 (RLS1) - 2 (GND1) OFF(Release) 0.968 to 1.232 kΩ
      ON(Lock) 5.394 to 6.206 kΩ
      Switch not operated 5.394 to 6.206 kΩ
      12 (RLS2) - 2 (GND1) OFF(Release) 0.968 to 1.232 kΩ
      ON(Lock) 5.394 to 6.206 kΩ
      Switch not operated 5.394 to 6.206 kΩ

      If the result is not as specified, replace the combination switch assembly (electric parking brake switch).