ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:C1245/62

DTC Code DTC Name
C1245/62 Deceleration Sensor

DESCRIPTION

The parking brake ECU assembly receives vehicle tilt angle information from the deceleration sensor (airbag ECU assembly) via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
C1245/62 Deceleration Sensor

One of following conditions is met:


  1. An error signal is sent from deceleration sensor (airbag ECU assembly) for approximately. 0.3 seconds.

  2. While the deceleration sensor (airbag ECU assembly) signal is judged to be stuck, starting off and stopping of vehicle occurs 16 times.

  3. Comparison error between deceleration sensor (airbag ECU assembly) 1 and deceleration sensor (airbag ECU assembly) 2 output values occurs for 60 seconds or more.

Deceleration sensor (Airbag ECU assembly) DTC stored An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

Note

When replacing the deceleration sensor (airbag ECU assembly), perform zero point calibration and store system information.


  • for Vehicle Stability Control System:

    Click here

  • for Continuously Variable Transaxle System (K115):

    Click here

  • for Stop and Start System:

    Click here

PROCEDURE


  1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check for DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

    B
    A
  2. CHECK DTC (ELECTRIC PARKING BRAKE SYSTEM)


    1. Clear the DTCs.

      Click here


      Chassis > Electric Parking Brake > Clear DTCs
    2. Turn the engine switch off.

    3. Check for DTCs.

      Click here


      Chassis > Electric Parking Brake > Trouble Codes
      Result
      Result Proceed to
      DTCs are output A
      DTCs are not output B

    A
    B