REAR BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Note

If both the LH and RH rear flexible hoses are to be disconnected at the same time, put identification marks on each rear flexible hose so that it can be installed to its original position.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. DRAIN BRAKE FLUID

    Note

    If brake fluid leaks onto any painted surface, immediately wash it off.

  3. REMOVE REAR FLEXIBLE HOSE


    1. A01IJQ5

      Remove the union bolt, gasket and rear flexible hose from the rear disc brake cylinder assembly.

    2. A01IL4Z

      Remove the 2 bolts and separate the rear flexible hose.

    3. A01IIM7

      Using a union nut wrench, disconnect the brake line while holding the rear flexible hose with a wrench.

      Note


      • Do not kink or damage the brake line.

      • Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.

    4. Remove the clip and rear flexible hose from the vehicle.