FRONT BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Note

If both the LH and RH front flexible hoses are disconnected at the same time, put identification marks on each front flexible hose so that it can be installed to its original position.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

    Click here

  2. DRAIN BRAKE FLUID

    Note

    If brake fluid leaks onto any painted surface, immediately wash it off.

  3. REMOVE FRONT FLEXIBLE HOSE


    1. A01IEV8

      Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.

      Note


      • Do not kink or damage the brake line.

      • Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.

    2. Remove the clip and disconnect the front flexible hose from the vehicle.

    3. A01IIXHN01

      Remove the bolt (A) and separate the front flexible hose from the steering knuckle.

    4. Remove the bolt (B).

    5. Remove the front speed sensor clamp and separate the front flexible hose from the front shock absorber assembly.

    6. A01UFAO

      Remove the union bolt, gasket and front flexible hose from the front disc brake cylinder assembly.