FRONT BRAKE(for 16 inch Front Disc Brake) REASSEMBLY

PROCEDURE


  1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

    Tech Tips

    Fully tighten the front disc brake bleeder plug after bleeding the system.

  2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL PISTON SEAL


    1. A01II3EC13
      B006PCE Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.

    2. A01ILACC02
      *1 Piston Seal
      *2 Front Disc Brake Cylinder

      Install the piston seal to the front disc brake cylinder.

      Note

      Securely install the piston seal into the groove of the front disc brake cylinder.

  4. INSTALL FRONT DISC BRAKE PISTON


    1. A01IIDIC02
      *1 Cylinder Boot
      *2 Front Disc Brake Piston
      B006PCE Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.

    2. A01IH1MC02
      *1 Cylinder Boot
      *2 Front Disc Brake Piston

      Install the cylinder boot to the front disc brake piston.

      Note

      Securely install the cylinder boot into the groove of the front disc brake piston.

    3. Apply a light layer of lithium soap base glycol grease to the contact surfaces of the front disc brake piston, and install it to the front disc brake cylinder.

      Note

      Do not forcibly install the front disc brake piston into the front disc brake cylinder.

    4. A01IHE3C01
      *1 Cylinder Boot
      *2 Front Disc Brake Cylinder
      *3 Front Disc Brake Piston

      Using SST, Install the cylinder boot to the front disc brake cylinder.

      Note

      Securely install the cylinder boot into the groove of the front disc brake cylinder and front disc brake piston.

      SST
      09608-10010   ( 09951-07150 )