BRAKE BOOSTER(for LHD) REASSEMBLY

PROCEDURE


  1. INSTALL VACUUM WARNING SWITCH ASSEMBLY


    1. Install a new check valve grommet to the brake booster assembly.

    2. B006QNRC02
      *a 15° +/- 10°
      B006LKF Up

      Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.

  2. INSTALL VACUUM SENSOR


    1. Install a new check valve grommet to the brake booster assembly.

    2. B006PLFC01
      *a 45° +/- 10°
      B006LKF Up

      Install the vacuum sensor to the brake booster assembly as shown in the illustration.

  3. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. Install a new check valve grommet to the brake booster assembly.

    2. Install the brake vacuum check valve assembly to the brake booster assembly.

  4. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. Temporarily install the clevis lock nut and brake master cylinder push rod clevis to the brake booster assembly.

      Note

      Fully tighten the clevis lock nut when adjusting the brake pedal height.