BRAKE MASTER CYLINDER(for RHD) DISASSEMBLY

PROCEDURE


  1. REMOVE BRAKE FLUID RESERVOIR


    1. Secure the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. A01IJOR

      Using a 5 mm pin punch and a hammer, tap out the brake master cylinder ring pin from the brake master cylinder sub-assembly.

      Note

      Do not drop the brake fluid reservoir.

    3. Remove the brake fluid reservoir from the brake master cylinder body.

    4. Remove the brake master cylinder body from the vise.

  2. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. A01IKHP

      Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.