BRAKE MASTER CYLINDER(for LHD) REASSEMBLY

PROCEDURE


  1. INSTALL MASTER CYLINDER RESERVOIR GROMMET


    1. A01IK1VC01
      B006N7C Lithium soap base glycol grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.

    2. Install the 2 master cylinder reservoir grommets to the brake master cylinder body.

  2. INSTALL BRAKE FLUID RESERVOIR


    1. Secure the brake master cylinder body in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder body.

    2. Install the brake fluid reservoir to the brake master cylinder body.

    3. A01IK50

      Using a 5 mm pin punch and a hammer, tap in the brake master cylinder ring pin to secure the brake fluid reservoir.

    4. Remove the brake master cylinder sub-assembly from the vise.