BRAKE MASTER CYLINDER(for LHD) COMPONENTS
ILLUSTRATION
| *1 | BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY | *2 | NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL |
| *3 | NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL | *4 | OUTER COWL TOP PANEL SUB-ASSEMBLY |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | AIR CLEANER CAP WITH AIR CLEANER HOSE | *2 | AIR CLEANER CASE SUB-ASSEMBLY |
| *3 | BATTERY | *4 | V-BANK COVER SUB-ASSEMBLY |
| *5 | AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY | *6 | BATTERY CLAMP BOLT |
| *7 | BATTERY INSULATOR | *8 | BATTERY CLAMP SUB-ASSEMBLY |
| *9 | POSITIVE BATTERY TERMINAL | *10 | NEGATIVE BATTERY TERMINAL |
| *11 | BATTERY TERMINAL CAP | *12 | NO. 1 FUEL VAPOR FEED HOSE |
| *13 | NO. 2 VENTILATION HOSE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | BRAKE MASTER CYLINDER SUB-ASSEMBLY | *2 | NO. 1 RESERVOIR TUBE |
| *3 | BRAKE MASTER CYLINDER O-RING | *4 | BRAKE BOOSTER ASSEMBLY |
| *5 | HOSE CLAMP BRACKET | *6 | BRAKE LINE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with a union nut wrench |
| ● | Non-reusable part |  |
Grease |
ILLUSTRATION
| *1 | BRAKE FLUID RESERVOIR | *2 | MASTER CYLINDER RESERVOIR GROMMET |
| *3 | BRAKE MASTER CYLINDER RING PIN | *4 | BRAKE MASTER CYLINDER BODY |
| ● | Non-reusable part | |
Lithium soap base glycol grease |