CHARGING SYSTEM PRECAUTION


  1. INITIALIZATION

    Note


    • Make sure to perform the necessary procedures (adjustment, calibration, initialization, or registration) after parts related to the charging system have been removed/installed or replaced.

      Click here

    • When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

    System Name See Procedure
    Stop and Start System (for 2AR-FE)

    Click here

    Stop and Start System (for 2GR-FKS)
    Panoramic View Monitor System
    Power Door Lock Control System
    Air Conditioning System
    Power Slide Door System
    Power Back Door System

  2. CHARGING SYSTEM PRECAUTION

    Note


    • Check that the battery cables are connected to the correct terminals.

    • Disconnect the battery cables when the battery is given a quick charge.

    • Do not perform tests with a high voltage insulation resistance tester.

    • Never disconnect the battery cables while the engine is running.

    • Check that the charging cable nuts are tightened on terminal B of the generator assembly and on the No.1 engine room relay block.