FRONT LOWER BALL JOINT ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY


    1. A01IHII

      Check for looseness.


      1. Lift up the vehicle.

      2. Move the front lower No. 1 suspension arm sub-assembly up and down by hand with a force of (294 N (30 kgf) or more) to check that there is no looseness at the front lower ball joint assembly.

        Tech Tips

        If the front lower ball joint assembly is loose, replace it with a new one.