FRONT DRIVE SHAFT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. B006PL0

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. B006LEBC01
      *A for LH Side
      *B for RH Side

      Check whether the drive shaft dimension (A) and (B) are within specification.

      Note

      Keep the drive shaft assembly level during inspection.

      Dimension (A) (for 2AR-FE)
      for LH Side 595.2 mm (1.95 ft.)
      for RH Side 911.15 mm (2.99 ft.)
      Dimension (A) (for 2GR-FKS)
      for LH Side 584.35 mm (1.92 ft.)
      for RH Side 925.15 mm (3.03 ft.)
      Dimension (B) (for 2GR-FKS)
      for LH Side 105.2 to 105.8 mm (4.15 to 4.16 in.)
      for RH Side 97.5 to 98.1 mm (3.84 to 3.86 in.)