OIL PAN INSTALLATION

PROCEDURE


  1. INSTALL OIL CLEANER (CVT) MAGNET


    1. B006RH4C02
      *1 Oil Cleaner (CVT) Magnet

      Install the 2 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly.

  2. INSTALL TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY


    1. Clean the transaxle oil (CVT) pan sub-assembly installation surface of the transaxle case.

    2. Install a new transaxle oil pan (CVT) gasket to the transaxle oil (CVT) pan sub-assembly.

    3. Install the transaxle oil (CVT) pan sub-assembly to the transaxle case with the 19 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    4. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    5. Using a 6 mm hexagon socket wrench, temporarily install the gasket and overflow plug to the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

    6. Using a 10 mm hexagon socket wrench, install a new gasket and drain plug to the transaxle oil (CVT) pan sub-assembly.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  3. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Click here

  4. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

  5. INSPECT FOR FLUID LEAK

  6. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click here

  8. INSTALL FRONT LOWER BUMPER ABSORBER

    Click here

  9. INSTALL FRONT BUMPER COVER (for ALPHARD)

    Click here

  10. INSTALL FRONT BUMPER COVER (for VELLFIRE)

    Click here