OIL PUMP DISASSEMBLY

PROCEDURE


  1. REMOVE CLUTCH DRUM OIL SEAL RING


    1. B006NCY

      Remove the 4 clutch drum oil seal rings from the stator shaft assembly.

      Note

      Do not expand the gap of the clutch drum oil seal rings excessively.

  2. REMOVE OIL STRAINER ASSEMBLY


    1. B006LKD

      Using a T30 "TORX" socket wrench, remove the 2 "TORX" bolts and oil strainer assembly from the front oil pump cover sub-assembly.

  3. REMOVE TRANSMISSION WIRE (OIL PUMP WITH SOLENOID ASSEMBLY)


    1. B006OR1

      Disconnect the connector to remove the transmission wire (oil pump with solenoid assembly).

  4. REMOVE OIL PUMP WITH SOLENOID ASSEMBLY


    1. B006N1X

      Remove the bolt, clamp and oil pump with solenoid assembly from the front oil pump cover sub-assembly.

  5. REMOVE STATOR SHAFT ASSEMBLY


    1. B006P7I

      Remove the 5 bolts and stator shaft assembly from the front oil pump body.

  6. REMOVE FRONT OIL PUMP DRIVE GEAR


    1. B006NV8

      Remove the front oil pump drive gear from the front oil pump body.

  7. REMOVE FRONT OIL PUMP DRIVEN GEAR


    1. B006P7R

      Remove the front oil pump driven gear from the front oil pump body.

  8. REMOVE FRONT OIL PUMP BODY


    1. B006MXP

      Remove the front oil pump body from the front oil pump cover sub-assembly.

  9. REMOVE RING PIN


    1. B006OD4

      Remove the 2 ring pins from the front oil pump cover sub-assembly.