VALVE BODY ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE TRANSMISSION WIRE

    Click here

  2. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. B006NDI

      Disengage the clamp to disconnect the transmission revolution sensor (NC) wire connector.

    2. B006PUP

      Remove the 9 bolts and transmission valve body assembly from the automatic transaxle case sub-assembly.

    3. B006OCIC01
      *1 Transaxle Case Gasket
      *2 No. 1 Front Oil Pump Cover Gasket
      *3 No. 2 Front Oil Pump Cover Gasket

      Remove the 2 transaxle case gaskets from the automatic transaxle case sub-assembly.

    4. Remove the transaxle case gasket from the counter drive gear sub-assembly.

    5. Remove the transaxle case gasket from the front oil pump assembly.

    6. Remove the No. 1 front oil pump cover gasket from the front oil pump assembly.

    7. Remove the No. 2 front oil pump cover gasket from the front oil pump assembly.