PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

      B006Q5R

  2. REMOVE TRANSMISSION CONTROL SHAFT LEVER

    Click here

  3. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. B006MIM

      Loosen the 2 bolts of the park/neutral position switch assembly.

    2. B006N6ZC17
      *a Protrusion

      Align the protrusions of the park/neutral position switch assembly.

    3. Hold the park/neutral position switch assembly in position and tighten the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      After installing the park/neutral position switch assembly, confirm that the 2 protrusions on the park/neutral position switch assembly are aligned.

  4. INSTALL TRANSMISSION CONTROL SHAFT LEVER

    Click here

  5. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION

    Click here