ATMOSPHERIC PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  2. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

    Click here

  3. REMOVE ATMOSPHERIC PRESSURE SENSOR (VACUUM SENSOR ASSEMBLY)


    1. B006KZR

      Disconnect the connector from the atmospheric pressure sensor (vacuum sensor assembly).

    2. B006N8S

      Remove the bolt and atmospheric pressure sensor (vacuum sensor assembly) from the vehicle body.

    3. B006O8G

      Remove the 2 nuts and atmospheric pressure sensor (vacuum sensor assembly) from the vacuum sensor bracket.