ATMOSPHERIC PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ATMOSPHERIC PRESSURE SENSOR (VACUUM SENSOR ASSEMBLY)

   
   

   1. Install the atmospheric pressure sensor (vacuum sensor assembly) to the vacuum sensor bracket with the 2 nuts.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   2. Install the atmospheric pressure sensor (vacuum sensor assembly) to the vehicle body with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   3. Connect the connector to the atmospheric pressure sensor (vacuum sensor assembly).

2. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here