ATF TEMPERATURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT ATF TEMPERATURE SENSOR


    1. B006KOBC07
      *a

      Component without harness connected

      (ATF Temperature Sensor Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (E2) - 1 (THO1) Always 79 Ω to 156 kΩ
      2 (E2) - Body ground and other terminals Always 10 kΩ or higher
      1 (THO1) - Body ground and other terminals Always 10 kΩ or higher

      If the resistance is out of the specified range with the ATF temperature shown in the preceding table, replace the ATF temperature sensor assembly. Otherwise, the driveability of the vehicle may decrease.

      ATF Temperature Specified Condition
      10°C (50°F) 5 to 8 kΩ
      25°C (77°F) 2.5 to 4.5 kΩ
      110°C (230°F) 0.22 to 0.28 kΩ