ATF TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

   
   

   1. Coat the O-ring of the ATF temperature sensor assembly with ATF.

   2. Coat the 4 bolts with ATF.

   3. 

      *a	ATF Temperature Sensor Assembly Connector
      *b	Clamp

      Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

      Tech Tips

      Bolt length:

      
      

      • Bolt (A): 25 mm (0.984 in.)

      • Bolt (B): 85 mm (3.35 in.)

   4. Engage the clamp to connect the wire harness to the transmission valve body assembly.

   5. Connect the ATF temperature sensor assembly connector.

2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

   Click here