ENGINE STOP AND START SOLENOID FILTER INSTALLATION

PROCEDURE

1. INSTALL ENGINE STOP AND START SOLENOID FILTER

   
   

   1. Install the engine stop and start solenoid filter with the nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the engine stop and start solenoid filter connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

   Click here

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for RHD)

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

5. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

   Click here