ENGINE STOP AND START SOLENOID FILTER REMOVAL

PROCEDURE

1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

   Click here

2. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

   Click here

3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for RHD)

   Click here

5. REMOVE ENGINE STOP AND START SOLENOID FILTER

   
   

   1. Disconnect the engine stop and start solenoid filter connector.

   2. Remove the nut and engine stop and start solenoid filter.