VACUUM SENSOR ASSEMBLY(for 2GR-FKS) INSTALLATION

PROCEDURE

1. INSTALL CHECK VALVE GROMMET

   
   

   1. Install a new check valve grommet to the brake booster assembly.

2. INSTALL VACUUM SENSOR

   
   

   1. Install the vacuum sensor to the brake booster assembly.

   2. Connect the connector to the vacuum sensor.

3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

   
   

   • for LHD

     Click here

   • for RHD

     Click here

4. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   
   

   • for LHD

     Click here

   • for RHD

     Click here

5. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

   
   

   • for LHD

     Click here

   • for RHD

     Click here

6. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

   
   

   • for LHD

     Click here

   • for RHD

     Click here

7. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   
   

   • for LHD

     Click here

   • for RHD

     Click here

8. INSPECT WASHER NOZZLE

   
   

   • for LHD

     Click here

   • for RHD

     Click here