VACUUM SENSOR ASSEMBLY(for 2GR-FKS) REMOVAL

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   
   

   • for LHD

     Click here

   • for RHD

     Click here

2. SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

   
   

   • for LHD

     Click here

   • for RHD

     Click here

3. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   
   

   • for LHD

     Click here

   • for RHD

     Click here

4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

   
   

   • for LHD

     Click here

   • for RHD

     Click here

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

   
   

   • for LHD

     Click here

   • for RHD

     Click here

6. REMOVE VACUUM SENSOR

   
   

   1. Disconnect the connector from the vacuum sensor.

   2. Remove the vacuum sensor from the brake booster assembly.

7. REMOVE CHECK VALVE GROMMET

   
   

   1. Remove the check valve grommet from the brake booster assembly.