ENGINE STOP AND START ECU INSTALLATION

PROCEDURE

1. INSTALL ENGINE STOP AND START ECU

   
   

   1. Install the engine stop and start ECU with the bolt and nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the blower with fan motor sub-assembly connector and engage the 2 clamps.

   3. Connect the 3 main body ECU (multiplex network body ECU) connectors.

   4. Connect the 3 engine stop and start ECU connectors.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. PERFORM REGISTRATION

   Click here