STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT STOP AND START SYSTEM CANCEL SWITCH (COMBINATION SWITCH ASSEMBLY)


    1. A01IIX4C05
      *a

      Component without harness connected

      (Stop and Start System Cancel Switch (Combination Switch Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      11 (S) - 9 (E) Pushed Below 50 Ω
      Not pushed 10 kΩ or higher

      If the result is not as specified, replace the stop and start system cancel switch (combination switch assembly).