STOP AND START SYSTEM(for 2AR-FE) FREEZE FRAME DATA


  1. DESCRIPTION

    The engine stop and start ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.

    Note


    • Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.

    • Turn the engine switch to on (IG) and park the vehicle on level ground. Check the freeze frame data using the GTS.


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the GTS on.

    5. Check for DTCs and read the freeze frame data.

  2. LIST OF FREEZE FRAME DATA


    Powertrain > Stop and Start
    Tester Display Measurement Item
    Total Distance Traveled Total distance traveled
    Total Distance Traveled - Unit Unit of Total Distance Traveled
    Neutral Switch Park/Neutral position switch assembly status
    IG Switch Push start switch assembly signal
    Stop Light SW (ECM) Stop light switch assembly signal from ECM
    Stop Light SW (ABS/VSC) Stop light switch assembly signal from vehicle stability control system
    Driver Courtesy Switch Signal Driver door courtesy switch signal
    Hood Courtesy Switch Hood condition (open, close)
    Stop&Start Cancel Switch Stop and start system cancel switch (combination switch assembly) signal
    Starter Starter status
    Starter Motor Starter motor status
    Engine Starter Signal Starter signal status
    Driver Seat Belt Buckle Switch Driver seat belt buckle switch status
    Engine Speed (ECM) Engine speed signal from ECM via CAN communication
    Battery Current Battery current
    Brake Negative Pressure Brake booster vacuum (negative pressure)
    Master Cylinder Pressure Brake fluid pressure
    Gradient of Road Surface Degree of road gradient
    Battery Fluid Temperature (Start) Battery fluid temperature at engine start
    Battery Fluid Temperature Estimated temperature inside battery
    Buzzer Buzzer status
    Eco Indicator Light Stop and start indicator status
    Oil Pressure Warning Light Prohibit Oil pressure warning status
    Oil Pump Relay Oil pump motor relay inside ECU status
    Stop&Start Cancel Light Code Transmission code from the engine stop and start ECU to combination meter assembly
    Brake Pressure Hold Request Brake fluid pressure holding request during stop and start control
    Brake Pressure Hold Request Status Brake fluid pressure holding status during stop and start control
    Stop&Start Operating Permission (Neutral Switch) Permission of stop and start control based on park/neutral position switch assembly conditions
    Stop&Start Operating Permission (Vehicle Speed) Permission of stop and start control based on the vehicle speed conditions
    Stop&Start Precondition Permission of stop and start control with all preconditions met
    Stop&Start Precondition 2 Permission of stop and start control with all preconditions met
    Hill Judging Hill judgment
    IG-ON State Before Starting Permission of stop and start control based on the vehicle speed since engine switch turned to on (IG)
    Stop&Start Operating Permission (Shift D Position) Permission of stop and start control based on shift lever position
    Stop&Start Operating Prohibition (CVT) Prohibition of stop and start control by continuously variable transaxle system
    Engine Start Request (Accelerator) Engine start request due to accelerator pedal operation
    Engine Start Request (Brake Negative Pressure Low) Engine start request due to low brake booster vacuum
    Engine Start Request (Brake Release) Engine start request due to brake pedal operation
    Engine Start Request (Shift Lever) Engine start request due to shift lever operation
    Engine Start Request (Shift Uncertain) Engine start request due to uncertain shift lever position
    Engine Start Request (ABS Vehicle Speed) Engine start request based on vehicle speed signal from the vehicle stability control system
    Engine Start Request (Steering) Engine start request by the power steering system
    Engine Start Request (Cancel SW) Engine start request by stop and start system cancel switch (combination switch assembly)
    Engine Start Request (IG Switch) Engine start request due to push start switch assembly operation
    Engine Start Request (A/C) Engine start request from air conditioning system
    Engine Start Request (AT/CVT) Engine start request from continuously variable transaxle system
    Engine Start Request (Battery Condition) Engine start request based on battery conditions
    Engine Start Request (ABS/VSC) Engine start request from vehicle stability control system
    Engine Start Request (ECM) Engine start request from ECM
    Engine Start Request (Detect DTC) Engine start request due to output of DTCs
    Engine Start Request (Shift P Position and Brake) Engine start request due to brake being depressed when the shift lever in P and the engine is stopped due to stop and start control
    Engine Start Request (4WD and Rear Differential Lock) Engine start request by AWD and rear differential lock
    Engine Start Request (ACC) Engine start request by dynamic radar cruise control system
    Engine Stall History during Stop&Start (Hood Open) History of engine stall due to the engine hood being opened with shift lever in D while the engine is stopped by stop and start control
    Engine Stall History during Stop&Start (Collision or Battery Voltage Low) History of engine stall due to a collision or low battery voltage when stop and start control operating
    Engine Stall History during Engine Starting (Collision) History of engine stall due to a collision while engine stopped by stop and start control
    Engine Start Fail History of engine restart failure while engine stopped by stop and start control
    Starter Operation # Number of starter operations (count record)
    Number of Engine Starts (IG-ON) The number of starter operations by push start switch assembly operation
    Number of Engine Starts (Stop & Start) The number of starter operations by stop and start control
    Deceleration Sensor Offset Value Deceleration sensor offset value
    Deceleration Sensor Calibration Deceleration sensor calibration status
    Stop&Start of Engine State Stop and start control status
    Idling Stop Rate Rate of the idling stop time to the entire engine switch on (IG) time of this trip
    Total Idling Stop Rate Rate of the overall idling stop time to the overall engine switch on (IG) time
    Stop & Start A/C Mode Selected air conditioning mode
    Integrated Current Battery integrated current
    Status of Battery Charge Control Battery charge control status
    Cranking Time Engine cranking time
    Minimum Voltage (Cranking) Minimum voltage when cranking engine
    Minimum Voltage (Starter Solenoid Engagement) Minimum voltage when starter begins operation
    Starter Type Starter assembly type
    State of BBC Backup boost converter status
    State of External BBC External backup boost converter status
    External BBC Overcurrent History External backup boost converter overcurrent history
    Stop&Start Operating Permission (Idling) Permission of stop and start control based on the engine idle conditions
    Stop&Start Operating Permission (Brake Master Pressure 0 Point Correction) Permission of stop and start control due to completion of brake master cylinder pressure zero point calibration
    Stop&Start Operating Permission (ABS/VSC 2) Permission of stop and start control by vehicle stability control system
    Stop&Start Operating Permission (Brake Negative Pressure) Permission of stop and start control based on the brake booster vacuum conditions
    Stop&Start Operating Permission (No Shift Operation) Permission of stop and start control based on the shift lever operation condition
    Stop&Start Operating Permission (After Running) Permission of stop and start control based on the initial trip conditions after the engine switch turned to on (IG)
    Stop&Start Operating Permission (Steering) Permission of stop and start control by the power steering ECU assembly
    Stop&Start Operating Permission (Engine Hood Closed) Permission of stop and start control based on the engine hood open/close conditions
    Stop&Start Operating Permission (Cancel Switch) Permission of stop and start control based on the stop and start system cancel switch (combination switch assembly) operation
    Stop&Start Operating Permission (Driver Side Buckle SW) Permission of stop and start control based on the driver seat belt condition
    Stop&Start Operating Permission (Driver Door Closed) Permission of stop and start control based on the driver door open/close conditions
    Stop&Start Operating Permission (Key Operation) Permission of stop and start control based on the push start switch assembly operation
    Stop&Start Operating Permission (Interval For Starter) Permission of stop and start control based on the conditions after engine restart
    Stop&Start Operating Permission (Starter Check Complete) Permission of stop and start control based on the starter circuit self-check result
    Stop&Start Operating Permission (A/C) Permission of stop and start control based on the air conditioning conditions
    Stop&Start Operating Permission (AT/CVT 2) Permission of stop and start control by continuously variable transaxle system
    Stop&Start Operating Permission (AT/CVT) Permission of stop and start control by continuously variable transaxle system
    Stop&Start Operating Permission (Power Management) Permission of stop and start control based on the battery conditions
    Stop&Start Operating Permission (ABS/VSC) Permission of stop and start control by vehicle stability control system
    Stop&Start Operating Permission (ECM 2) Permission of stop and start control by SFI system
    Stop&Start Operating Permission (ECM 1) Permission of stop and start control by the ECM
    Stop&Start Operating Permission (Elapsed Time After IG-ON) Permission of stop and start control based on time elapsed since engine switch turned to on (IG)
    Stop&Start Operating Permission (Idling Stop Performance Waiting Time) Permission of stop and start control to be operated 2 or more times during a stop based on stop time
    Stop&Start Operating Permission (Ambient Temperature) Permission of stop and start control based on the air conditioning conditions
    Stop&Start Operating Permission (Road Surface Gradient) Permission of stop and start control based on the road grade conditions
    Stop&Start Operating Permission (DTC) Permission of stop and start control based on the DTC output conditions
    Stop&Start Operating Permission (Minimum Voltage (Starter Solenoid Engagement)) Permission of stop and start control based on minimum voltage after during starter solenoid engagement
    Stop&Start Operating Permission (Minimum Voltage (Cranking)) Permission of stop and start control based on minimum voltage during cranking
    Stop&Start Operating Permission (4WD and Rear Differential Lock) Permission of stop and start control by the AWD and rear differential lock
    Stop&Start Operating Permission (ACC) Permission of stop and start control by the dynamic radar cruise control system
    EPS Load Electric power steering current
    Steering Angle Steering angle
    Steering Angle Velocity Steering wheel turning speed
    Shift Position Shift lever position
    Engine Stop Request Engine stop request
    Stop&Start Cancel Stop and start system cancel status
    Auto A/C Availability of air conditioning system on vehicle
    Running History Vehicle driving record
    Wheel Speed Malfunction Wheel speed malfunction status
    EPS Assist Current Available Whether the power steering assist current value is available
    Fuel Cut Signal Fuel cut signal
    Idle Engine idling status
    Engine Start (IG SW) Engine start by push start switch assembly operation
    Engine Start Request (Courtesy SW or Buckle SW) Engine start request by courtesy switch (for driver side) or driver side buckle switch
    Stop&Start Operating Permission (Integrated Current) Permission of stop and start control based on the integrated current value
    Stop&Start Operating Prohibition (Jump Start) Prohibition of stop and start control based on the jump start conditions
    Deceleration Sensor Output Stuck Deceleration sensor output stuck
    ABS Running Operating condition of the vehicle stability control system
    Engine Type Information Information on the engine type from SFI system
    Stop&Start Operating Permission (Master Cylinder Pressure) Permission of stop and start control based on the master cylinder pressure
    Slip History Slip history existence
    Engine Start Request (A/C 2) Engine start request from air conditioning system
    Blower Switch Blower switch status
    Steering Angle Sensor Malfunction Steering sensor malfunction
    Steering Angle Sensor Circuit Open (+B) Steering sensor +B circuit malfunction
    Steering Angle Sensor Abnormal Value Steering sensor value malfunction
    Steering Torque Sensor Malfunction Steering torque sensor status
    Battery Type Set battery type
    Shift Mode Shift mode status
    Steering Wheel Torque Steering wheel torque
    Air Suspension Available Availability of air suspension system on vehicle
    Welcab Available Availability of side left up seat system on vehicle
    External BBC Available Availability of external backup boost converter (eco run vehicle converter assembly) on vehicle
    Brake Hold Function Available Availability of brake hold function on vehicle
    Steering Angle Sensor Available Availability of steering sensor on vehicle
    4WD Available Whether the vehicle is equipped with a 4WD ECU assembly
    PCS Available Availability of pre-collision system on vehicle
    Communication Method of Brake Boost Sensor Method of communication with vacuum sensor
    IPA Available Whether the vehicle is equipped with the intelligent parking assist function
    Cancel Switch (Multi-display) Available Whether the vehicle is equipped with an stop and start system cancel switch (combination switch assembly)
    ACC Available Availability of dynamic radar cruise control system on vehicle
    ACC Operation State Dynamic radar cruise control operating condition
    Coolant Temperature Engine coolant temperature
    Engine Speed Engine speed
    Vehicle Speed Vehicle speed
    Atmospheric Pressure Atmospheric pressure (calculated value)
    Battery Voltage Battery voltage
    Ambient Temperature Ambient temperature
    Oil Pump Drive Request Signal Oil pump with motor assembly drive request signal
    Engine Start Request (IPA) Engine start request based on intelligent parking assist system
    Engine Start Request (Welcab) Engine start request based on side lift up seat system
    Stop&Start Operating Permission (Discharged Oil Pump Air) Permission of stop and start control based on oil pump with motor assembly air discharge condition
    Stop&Start Operating Permission (Inspected Oil Pump) Permission of stop and start control based on oil pump with motor assembly condition
    Stop&Start Operating Permission (IPA) Permission of stop and start control by intelligent parking assist system
    Stop&Start Operating Permission (Welcab) Permission of stop and start control by side lift up seat system
    Oil Pump Air Discharge status Oil pump with motor assembly air discharge status
    ECB Available Availability of electronically controlled brake system on vehicle
    Oil Pump Motor Revolution Frequency Oil pump with motor assembly revolution frequency
    State of Oil Pump Motor Revolution Oil pump motor revolution status
    Oil Pump Duty Oil pump motor duty status
    Learning Status of External BBC Availability Learning status of external BBC availability
    Welcab Signal Status Side lift up seat system signal status