STARTER COMPONENTS
ILLUSTRATION
| *1 | BATTERY | *2 | BATTERY CARRIER |
| *3 | BATTERY CARRIER SUPPORT | *4 | STARTER ASSEMBLY |
| *5 | WIRE HARNESS CLAMP BRACKET | *6 | POSITIVE BATTERY TERMINAL |
| *7 | NEGATIVE BATTERY TERMINAL | *8 | BATTERY CLAMP SUB-ASSEMBLY |
| *9 | BATTERY CLAMP BOLT | *10 | BATTERY INSULATOR |
| *11 | BATTERY TRAY | *12 | BATTERY TERMINAL CAP |
| *13 | TERMINAL CAP | *14 | CENTER NO. 1 COWL TOP VENTILATOR LOUVER |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | HARNESS | *2 | PLANETARY GEAR |
| *3 | REPAIR SERVICE STARTER KIT | *4 | RUBBER SEAL |
| *5 | STARTER ARMATURE ASSEMBLY | *6 | STARTER ARMATURE PLATE |
| *7 | STARTER BRUSH HOLDER ASSEMBLY | *8 | STARTER COMMUTATOR END FRAME ASSEMBLY |
| *9 | STARTER INRUSH CURRENT REDUCTION RELAY | *10 | STARTER YOKE ASSEMBLY |
| *11 | WIRE HARNESS | *12 | STARTER DRIVE HOUSING ASSEMBLY |
| *13 | MAGNET SWITCH | *14 | RETURN SPRING |
| *15 | PLUNGER | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque |  |
High-temperature Grease |