OIL PUMP INSPECTION

PROCEDURE


  1. INSPECT OIL PUMP RELIEF VALVE


    1. B006O3Y

      Coat the oil pump relief valve with engine oil and check that it falls smoothly into the valve hole by its own weight.

      Tech Tips

      If the oil pump relief valve does not fall smoothly, replace the timing chain cover assembly.

  2. INSPECT OIL PUMP ROTOR SET


    1. Apply engine oil to the drive rotor and driven rotor.

    2. B006NNNC01
      *a Rotor Mark

      Install the drive rotor and driven rotor to the timing chain cover assembly with the rotor marks facing up. Check that the rotors rotate smoothly.

      Tech Tips

      If the rotors do not rotate smoothly, replace the timing chain cover assembly.

    3. B006Q2GC01
      *a Feeler Gauge

      Check the tip clearance.


      1. Using a feeler gauge, measure the clearance between the drive rotor and driven rotor tips as shown in the illustration.

        Standard Tip Clearance
        0.040 to 0.150 mm (0.00157 to 0.00591 in.)
        Maximum Tip Clearance
        0.150 mm (0.00591 in.)

        Tech Tips

        If the tip clearance is more than the maximum, replace the timing chain cover assembly.

    4. B006Q13C02
      *a Precision Straightedge
      *b Feeler Gauge

      Check the side clearance.


      1. Using a feeler gauge and precision straightedge, measure the clearance between the drive rotor and driven rotor and precision straightedge as shown in the illustration.

        Standard Side Clearance
        0.030 to 0.070 mm (0.00118 to 0.00276 in.)
        Maximum Side Clearance
        0.070 mm (0.00276 in.)

        Tech Tips

        If the side clearance is more than the maximum, replace the timing chain cover assembly.

    5. B006MAEC02
      *a Feeler Gauge

      Check the body clearance.


      1. Using a feeler gauge, measure the clearance between the timing chain cover assembly and driven rotor as shown in the illustration.

        Standard Body Clearance
        0.250 to 0.325 mm (0.00984 to 0.0128 in.)
        Maximum Body Clearance
        0.325 mm (0.0128 in.)

        Tech Tips

        If the body clearance is more than the maximum, replace the timing chain cover assembly.