OIL PRESSURE SWITCH REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the engine oil pressure switch assembly connector.

    2. B006OZEC01
      *1 Wire Harness Bracket
      *2 Wire Harness

      Disconnect the wire harness from the wire harness bracket.

    3. Remove the bolt to separate the wire harness bracket.

    4. B006NYE

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.