THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

   
   

   1. Install a new gasket to the water inlet with thermostat sub-assembly.

   2. Install the water inlet with thermostat sub-assembly with the 2 bolts and 2 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. CONNECT WATER BY-PASS HOSE

   
   

   1. Connect the water by-pass hose and slide the clip to secure it.

3. INSTALL ENGINE MOUNTING BRACKET RH

   Click here

4. CONNECT ENGINE WIRE

   
   

   1. Engage the clamp to connect the engine wire.

   2. Install the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the water inlet with thermostat sub-assembly connector.

5. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

   Click here