THERMOSTAT REMOVAL

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

    Click here

  2. DISCONNECT ENGINE WIRE


    1. B006R16

      Disconnect the water inlet with thermostat sub-assembly connector.

    2. Remove the bolt.

    3. Disengage the clamp to disconnect the engine wire.

  3. REMOVE ENGINE MOUNTING BRACKET RH

    Click here

  4. DISCONNECT WATER BY-PASS HOSE


    1. B006QLS

      Slide the clip and disconnect the water by-pass hose.

  5. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    1. B006Q6N

      Remove the 2 bolts, 2 nuts and water inlet with thermostat sub-assembly.

    2. Remove the gasket from the water inlet with thermostat sub-assembly.