TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Connect the tire pressure warning ECU and receiver connector.

    2. Engage the hook to temporarily install the tire pressure warning ECU and receiver.

    3. B006PWY

      Install the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL QUARTER LOCK PILLAR GARNISH LH

    Click here

  3. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  4. INSTALL DECK SIDE GARNISH LH

    Click here

  5. INSTALL ROPE HOOK ASSEMBLY

    Click here

  6. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  7. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  8. INSTALL BACK DOOR SCUFF PLATE

    Click here

  9. INSTALL UTILITY BOX SUB-ASSEMBLY

    Click here

  10. INSTALL REAR UPPER NO. 2 FLOOR BOARD PLATE

    Click here

  11. INSTALL REAR NO. 3 FLOOR BOARD ASSEMBLY

    Click here

  12. INSTALL REAR NO. 2 FLOOR BOARD ASSEMBLY

    Click here

  13. INSTALL REAR NO. 1 FLOOR BOARD ASSEMBLY

    Click here

  14. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Click here

  15. REGISTER TRANSMITTER ID

    Click here

  16. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  17. PERFORM INITIALIZATION

    Click here