FUEL SENDER GAUGE ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FUEL SENDER GAUGE ASSEMBLY

   
   

   1. Slide the fuel sender gauge assembly downward and engage the claw (A) to install the fuel sender gauge assembly.

      Note

      
      

      • Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

      • Be careful not to bend the arm of the fuel sender gauge assembly.

   2. Connect the fuel sender gauge assembly connector.

      Note

      Securely connect the fuel sender gauge assembly connector.

   3. Engage the 4 clamps to connect the wire harness of the fuel sender gauge assembly.

      Note

      First connect the wire harness of the fuel sender gauge assembly, and then the fuel pump harness.

   4. Engage the 3 clamps to connect the fuel pump harness.

   5. Install the harness protector to the wire harness.

2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

   Click here