FUEL FILTER REPLACEMENT

CAUTION / NOTICE / HINT

Note


  • Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

  • When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.

B006PXUC01
*a Tube

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  3. SEPARATE FUEL FILTER

  4. REMOVE FUEL PUMP

    Click here

  5. REMOVE FUEL MAIN VALVE ASSEMBLY

    Click here

  6. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the No. 1 fuel suction support from the fuel filter.

  7. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.

  8. INSTALL FUEL MAIN VALVE ASSEMBLY

    Click here

  9. INSTALL FUEL PUMP

    Click here

  10. INSTALL FUEL FILTER

  11. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here

  12. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here